ap3300b3301a

Front axle - oil change

Tipo ap · tema 33.00 · versione 0103 · 2017-06-20

Valido per: Model 368.00/05/15, 384.233/311/333 with front axle 739 Model 936.315 with front axle 739.410/411

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 33 Asse anteriore › 33.00 Generalità — Serie 368 (modelli 00*, 05*, 15*) · Serie 384 (modelli 233, 311, 333) · Serie 936 (modelli 315)

EinPAS 17 Organi della trasmissione/assale › 17.50 Assale anteriore › 17.50.65 Ingranaggi e differenziale al ponte anteriore/trasmissione passante — Serie 368 (modelli 00*, 05*, 15*) · Serie 384 (modelli 233, 311, 333) · Serie 936 (modelli 315)

Valido anche per motori/cambi: 739 ***, 739 410, 739 411

AP33.00-B-3301A

Front axle - oil change

13.06.2017

Model

368.00/05/15, 384.233/311/333 with front axle 739

Model

936.315 with front axle 739.410/411

Front axle - oil change

Wheel hub cover with integrated display

1

Plug

2

Level screen

B33.20-0040-11

Drain

1

Drive the vehicle to a suitable place to carry out the job

It needs to be on horizontal and level ground.

Danger

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between vehicle lift columns and position the four support plates at the vehicle lift support points specified by the vehicle manufacturer.

AS00.00-Z-0010-01A

2

Lift the front axle and turn both wheels until the drain holes are pointing down

3

Lower the front axle and remove the plugs (1) from the wheel hub covers

Let the oil drain completely catching it in a suitable container.

Refill

4

Lift the front axle and turn both wheels until the drain holes are pointing up

5

Fill the wheel hubs with new oil

Check the oil level through the marking in visor (2) and correct if necessary.

6

Install the plugs (1) in the drain holes

At each intervention the plug sealing ring has to be changed.

7

Lower the front axle

Documenti citati