ap2520b2910b

Clutch mechanism - inspect fluid level, adjust to correct level

Tipo ap · tema 25.20 · versione 0201 · 2017-08-04

Valido per: Model 384.1, 386.0/3 Model 688.10/12/13/14/23/24/25 Model 693.02/08/10/12/14/154/17/18/19/38/39 Model 694.00/02/04, 695.0/3, 696.0/3

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 2 Telaio › 25 Frizione › 25.20 Comando frizione — Serie 384 (modelli 1**) · Serie 386 (modelli 0**, 3**) · Serie 688 (modelli 10*, 12*, 13*, 14*, 23*, 24*, 25*) · Serie 693 (modelli 02*, 08*, 10*, 12*, 14*, 154, 17*, 18*, 19*, 38*, 39*) · Serie 694 (modelli 00*, 02*, 04*) · Serie 695 (modelli 0**, 3**) · Serie 696 (modelli 0**, 3**)

EinPAS 17 Organi della trasmissione/assale › 17.15 Frizione › 17.15.5 Azionamento della frizione — Serie 384 (modelli 1**) · Serie 386 (modelli 0**, 3**) · Serie 688 (modelli 10*, 12*, 13*, 14*, 23*, 24*, 25*) · Serie 693 (modelli 02*, 08*, 10*, 12*, 14*, 154, 17*, 18*, 19*, 38*, 39*) · Serie 694 (modelli 00*, 02*, 04*) · Serie 695 (modelli 0**, 3**) · Serie 696 (modelli 0**, 3**)

AP25.20-B-2910B

Clutch mechanism - inspect fluid level, adjust to correct level

25.07.2017

Model

384.1, 386.0/3

Model

688.10/12/13/14/23/24/25

Model

693.02/08/10/12/14/154/17/18/19/38/39

Model

694.00/02/04, 695.0/3, 696.0/3

Clutch mechanism - inspect fluid level, adjust to correct level
Clutch mechanism - inspect fluid level, adjust to correct level

B29.00-0010-01

Represented in model 693.196

1

Reservoir

A

Fluid level maximum mark

B

Fluid level minimum mark

Represented in model 693.186

1

Reservoir

A

Fluid level maximum mark

B

Fluid level minimum mark

B29.00-0020-01

Clutch mechanism - inspect fluid level, adjust to correct level
Clutch mechanism - inspect fluid level, adjust to correct level

B29.00-0004-01

Represented in model 694.020

1

Reservoir

A

Fluid level maximum mark

B

Fluid level minimum mark

Represented in model 688.1

1

Reservoir

A

Fluid level maximum mark

B

Fluid level minimum mark

B29.00-0012-01

Check

Caution

Risk of poisoning from swallowing brake fluid. Risk of injury from skin and eye contact with brake fluid

Only pour brake fluid into suitable and appropriately marked containers. Wear protective clothing and eye protection when handling brake fluid.

AS42.50-Z-0001-01A

Warning

Risk of injury caused by pinching and crushing when opening and closing engine hood

No one should be within the swivel range of the engine hood as it is being opened or closed. Always open engine hood all the way to the end position until this engages in the front locks.

AS88.40-Z-0001-01A

1

Tilt the engine hood

AR88.40-B-1000A

Warning

Risk of injury caused by body parts being pinched or crushed as cab is tilted

Ensure that no one is within the tilting range of the cab as it is being tilted. Always tilt the cab all the way to the end position and secure with the safety strut.

AS60.80-Z-0001-01A

2

Tilt the cab

AR60.80-B-0010C

3

Open front access end cover

In vehicles LO, the access to perform maintenance and repair tasks varies different according to body type/manufacturer.

Refer to the body makers instructions.

4

Check reservoir fluid level (1)

Supplying will be correct when reservoir level is between maximum (A) and minimum (B) level marks.

If fluid is below minimum level mark (B), check clutch activation sealing before fill it up again.

5

Correct reservoir fluid level (1)

After verifying sealing only, remove reservoir end cover and fill up fluid.

Documenti citati