AP13.22-S-1381M | Replace V-ribbed belt | 16.7.09 |
ENGINES 646.9 in MODEL 639 with CODE (ZU9) National version for Mexico
S13.22-4502-06
1 Poly-V-belt
| Removing | ||
Danger! | Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension | Use only approved tensioning devices; shield off hazard area if necessary. | |
Danger! | Risk of death caused by vehicle slipping or toppling off of the lifting platform. | Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer. | |
1 | Remove air filter housing | ||
2 | Lift/jack up vehicle | ||
| Special instructions for lifting and supporting vehicle | ||
3 | Detach front lower engine compartment paneling | ||
4 | Loosen poly-V-belt (1) | Release poly-V belts (1) from below. | |
| Pin for locking poly-V belt tensioning device | ||
5 | Remove poly-V-belt (1) | When carrying out further operations on the engine or timing case cover, relieve pressure on tensioning device. Inspect belt pulley sections and tensioning device for damage and dirt, replace if necessary. | |
6 | Check guide pulleys for signs of wear | If wear detected, subject to separate repair order: | |
Replace guide pulleys | |||
| Install | ||
7 | Fit on poly V-belt (1) | Do not use belt wax or any similar products. Fit on poly-V belt (1), beginning at the tensioner pulley. | |
8 | Tension poly-V belt (1) | Tension poly-V belts (1) from below. | |
| Pin for locking poly-V belt tensioning device | ||
9 | Install front lower engine compartment paneling | ||
10 | Install air filter housing |
Documenti citati
- ah0060n010001a Avvertenze per il sollevamento
- ar0060s1000s Sollevare il veicolo, montarlo sui cavalletti
- ar0910s1150s Smontare, montare la scatola del filtro aria
- ar1321s3350sd Smontare e montare il rullo di rinvio della cinghia trapezoidale a nervature
- ar1322s390201sd Allentare la tensione della cinghia trapezoidale a nervature
- ar1322s390202s Schema di azionamento della cinghia trapezoidale a nervature
- ar1322s390204sd Tendere la cinghia trapezoidale a nervature
- ar6120s110502s Smontare, montare il rivestimento anteriore vano motore inferiore
- as0000z000101a Pericolo di lesioni da schiacciamento o incastro durante i lavori su molle o corpi elastici sotto carico
- as0000z001001a Pericolo di morte in caso di scivolamento o di ribaltamento del veicolo dalla piattaforma di sollevamento
- wf5850s132502s Perno di arresto del dispositivo tendicinghia della cinghia trapezoidale a nervature