ap1322b1351a
Inspect poly-V-belt for wear and damage
Tipo ap · tema 13.22 · versione 0201 · 2019-10-25
Valido per: Engine 904.9, 906.9 in model 368, 382, 384 Engine 924.9, 926.9 in model 368, 382, 384 Engine 926.910 in model 634.001
Non disponibile in “it”; mostrato in Inglese.
Collocazione
Gruppo funzionale 1 Motore › 13 Compressore aria, Trasmissione a cinghia › 13.22 Trasmissione monocinghia — Serie 368 · Serie 382 · Serie 384 · Serie 634 (modelli 001) · Serie 904 (modelli 9**) · Serie 906 (modelli 9**)
EinPAS 15 Motore › 15.18 Trasmissione a cinghia › 15.18.30 Cinghia/puleggia/tenditore/rullo di rinvio — Serie 368 · Serie 382 · Serie 384 · Serie 634 (modelli 001) · Serie 904 (modelli 9**) · Serie 906 (modelli 9**)
Valido anche per motori/cambi: 924 9**, 926 9**, 926 910
AP13.22-B-1351A
| Inspect poly-V-belt for wear and damage
| 16.10.2019
|
Engine
| 904.9, 906.9 in model 368, 382, 384
|
Engine
| 924.9, 926.9 in model 368, 382, 384
|
Engine
| 926.910 in model 634.001
|
1
| Water pump pulley
|
2
| Anti-vibration pulley
|
3
| Alternator's pulley
|
4
| Tensioning roller
|
1
| Water pump pulley
|
2
| Anti-vibration pulley
|
3
| Alternator's pulley
|
4
| Tensioning roller
|
5
| Tensioning roller
|
| Check
|
|
|
1
| Open the engine access cover
| Refer to the body makers instructions.
|
|
|
|
| Access to perform the maintenance and repairs varies according to the bodywork type/manufacturer of the bodywork.
|
|
2
| Remove inspection hole cover on timing case and install turning device
|
|
|
|
|
| Engine 904.9, 906.9 in model 368, 382, 384
Engine 924.9, 926.9 in model 368, 382, 384
Engine 926.910 in model 634.001
Turning device
| *904589046300
|
3
| Turn the engine step by step with the engine turning device , examining the entire perimeter of the drive belt for wear or damage
| Deterioration aspects of the Poly-V drive belt.
|
|
|
|
| Damage profiles for a poly-V belt
| AP13.22-B-1351-01A
|
|
|
| Replace the worn or damaged drive belt.
|
|
|
|
| The belt tension and deflection is automatically corrected.
|
|
|
|
|
Turning device
| *904589046300
|
4
| Remove the turning device and install the inspection hole cover of the engine housing
|
|
|
Documenti citati
