ap0020b0020ta

Lubrication points

Tipo ap · tema 00.20 · versione 0124 · 2019-07-25

Valido per: Model 934.241/251, 938.14 with engine 457.9, 460.984 Model 936.315 with engine 541.976 Model 958.0/1 with engine 904.9, 906.9, 924.9, 926.9 Model 958.2/4 with engine 457.9, 906.9, 926.9

Non disponibile in “it”; mostrato in Inglese.

Collocazione

Gruppo funzionale 0 In generale › 00 Veicolo in generale › 00.20 Manutenzione, sistemi di manutenzione (FSS, ASSYST) — Serie 460 (modelli 984) · Serie 904 (modelli 9**) · Serie 906 (modelli 9**) · Serie 934 (modelli 241, 251) · Serie 936 (modelli 315) · Serie 938 (modelli 14*) · Serie 958 (modelli 0**, 1**, 2**, 4**)

EinPAS 45 Dati/informazione › 45.10 Veicolo complessivo › 45.10.20 Veicolo complessivo — Serie 460 (modelli 984) · Serie 904 (modelli 9**) · Serie 906 (modelli 9**) · Serie 934 (modelli 241, 251) · Serie 936 (modelli 315) · Serie 938 (modelli 14*) · Serie 958 (modelli 0**, 1**, 2**, 4**)

Valido anche per motori/cambi: 457 9**, 541 976, 924 9**, 926 9**

AP00.20-B-0020TA

Lubrication points

24.07.2019

Model

934.241/251, 938.14 with engine 457.9, 460.984

Model

936.315 with engine 541.976

Model

958.0/1 with engine 904.9, 906.9, 924.9, 926.9

Model

958.2/4 with engine 457.9, 906.9, 926.9

Lubrication points

Axle sleeve

Front axle

Second front axle

Driving additional axle

N33.25-0238-01

Lubrication points

Cam trees (drum brakes)

Front axle

N42.15-0202-01

Lubrication points
Lubrication points

Cam trees (drum brakes)

Rear axle

N42.15-2059-01

N42.15-0200-01

Lubrication points

Automatic regulator example ( drum brakes)

N42.15-2058-01

Lubrication points

Universal joints and sliding yoke of propeller shafts

Activation and auxiliary activations

N41.10-2020-01

Lubrication points

Engine front cushion

Comfort suspension

N31.00-2056-01

Lubrication points
Lubrication points

Trailer coupling

N31.10-0257-01

N31.10-2086-01

Lubrication points

Rear suspension (6x2)

Spring compensator, swinging spring

B00.20-0010-01

Lubrication points

5th wheel lubrication point

B31.10-0003-01

Lubrication points

N55.20-0211-09

Tilting system (example)

1

Grease pump lubrication point

2

Lubrication point for loose grease

3

Oil lubrication point

1.1

Grease pump lubrication point (if appropriate)

Lubrication points

Tilting system (example)

2

Lubrication point for loose grease

3

Oil lubrication point

N55.20-2018-10

1

Especial equipment lubrication points as well as respective aggregates and drive shafts should be lubricated according to manufacturer instructions

Especial framework vehicles and additional aggregates only.

Especial equipment and additional aggregates lubrication - have separate billing.

2

Remove coatings

If necessary.

3

Clean grease tips

4

Open and lubricate trailer coupling

Observe manufacturer maintenance instruction to avoid excessive lubrication.

Danger

Risk of death. There is a risk of death to persons located within the tilting range or underneath the raised dump body during operation. Risk of injury There is a risk of body parts being crushed or pinched when the dump body is lowered.

All persons must remain outside the tilting range of the dump body during its operation. Always secure the raised dump body with the dump body support before starting any work underneath it.

AS55.20-Z-0001-01A

5

Lubricate tilting system

Observe manufacturer maintenance instructions.

6

Oil the lubrication points

When using high pressure lubrication pump, lubrication pressure of 180 bar must not be exceeded.

7

Lubricate rear axle springs

Where grease fittings studs exist.

8

Lubricate the 5th wheel

Observe manufacturer maintenance instructions.

9

Remove excess grease from lubrication points

10

Install coatings

If necessary.

Documenti citati