1 | Key (choose/confirm) |
2 | Key (up) |
3 | Key (low) |
4 | Key (exit) |
5 | Multi-functional display |
6 | Reset push button |
N00.20-2115-11
Reset intervals only for the maintenance services performed.
An accidental resetting cannot be undone. The traffic or operation security of the vehicle can be in danger.
Stored oil data on engine oil and transmission must correspond to the oil quality (number of MB prescriptions sheet of auxiliary materials) and oil viscosity (SAE class). If necessary, the values must be changed. The exhibition sequence in the "maintenance" menu depends to the programming of the maintenance services.
Call station maintenance or maintenance dates
1 | Turn the key to unlock the flywheel lock. Basic menu has been shown on multifunction display (5). |
2 | Press the key (2 or 3) so many times until showing "Service-Info" on multifunction display (5). |
3 | Press the key (1) to activate the sub-menu. |
4 | Press the key (2 or 3) until service place is showed on multifunction display (5). |
5 | Press the key (1) to activate the corresponding service place. On multifunction display (5) the date or travel route in kilometers has been showed until the next maintenance place. |
6 | Press the key (4) to exit from menu and choose another one. |
Confirm service operation (restore services)
7 | Activate the service place on multifunction display (5). |
8 | Press the Reset key (6) (i.g. with a pen) and keep it pushed by approximately 1 second. |
Maintenance system resets the maintenance date on multifunction display (5). The multifunction display (5) indicates "--.--.--". |
Search and change the oil data stored
9 | Press the key (2 or 3) so many times until multifunction display (5) shows the "Adjustments" menu. |
Stored oil data on engine oil and transmission must correspond to the oil quality (number of MB prescriptions sheet of auxiliary materials) and oil viscosity (SAE class). If necessary, the values must be changed. The exhibition sequence in the "maintenance" menu depends to the programming of the maintenance services. |
10 | Press key (1) to activate the sub-menu. |
11 | Press key (2 or 3) until the bar shows "Auxiliary materials". |
12 | Press key (1) to activate the sub-menu. |
13 | Press the key (2 or 3) until desired menu appears: |
14 | Press key (1) to activate the required menu. |
15 | Press the Reset key (6) (e.g. using a pen) as many times until engine or shifter oil viscosity or quality is shown (page no. of the MB auxiliary material requirement) on multifunction display (5). |
Choose the sulfur content of the fuel according to the country code list. |
16 | Press the button (4) to go back to main menu. |