AR83.25-D-1124B | Remove and install air conditioning pushbutton control module | 3.9.99 |
MODELS 901.6, 902.6, 903.6, 904.6, 905.6
except CODE (H25) Automatic heater control "Heatmatic"
except CODE (HH9) Automatic air conditioning "Tempmatic"
MODEL 690.6 except CODE (HH9) Automatic air conditioning "Tempmatic"
D83.20-1102-11
1 Air conditioning pushbutton control module
2 Pull wire
3 Pull wire
4 Connector
5 Pull wire
6 Screw
7 Bracket
| Remove, Install | ||
1.1 | Remove stowage compartment below pencil holder | For version without tachograph, without code. | |
1.2 | Remove tachograph | For version with tachograph, | |
2 | Remove cover on center part of instrument panel | ||
3 | Unscrew bolts (6) | ||
4 | Identify cables (2, 3 and 5) and remove from the air conditioning pushbutton control module (1) | Installation: The cable for the lower adjusting lever must be attached to the front adjusting knurl of the control and operating module for the climate control. | |
5 | Pull out plug (4) | ||
6 | Unscrew bracket (7) on both sides | Only if the control and operating module for climate control is replaced. | |
7 | Install in the reverse order |