ar0716w100802h
Remove/install rear wiring harness for fuel injectors
Típus ar · téma 07.16 · verzió 0101 · 2016-05-12
Érvényes: Engine 470.9## ## as of 222434, 471.9## ## as of 124619, 473.9
„hu” nyelven nem érhető el; megjelenítve: Angol.
Elhelyezkedés
Funkciócsoport 1 Motor › 07 Keverékképzés › 07.16 Common-Rail dízel befecskendezőrendszer — 470 sorozat (modellek: 9**) · 471 sorozat (modellek: 9**)
EinPAS 15 Motor › 15.45 Motormenedzsment › 15.45.12 Szenzor/kapcsoló/vezetékköteg — 470 sorozat (modellek: 9**) · 471 sorozat (modellek: 9**)
Motorokra/sebességváltókra is érvényes: 473 9**
AR07.16-W-1008-02H
| Remove/install rear wiring harness for fuel injectors
|
|
|
Engine
| 470.9## ## as of 222434, 471.9## ## as of 124619, 473.9
|
Number
| Designation
|
| Engine 470.9, 471.9, 473.9
|
BA05.20-N-1002-04A
| Nut, electrical line to engine brake solenoid valve
| Nm
| 1,5
|
Number
| Designation
|
|
| Engine 470.9, 471.9, 473.9
|
BA05.20-N-1004-04A
| Screw/bolt, electrical wiring harness of fuel injectors to camshaft case
| M6
| Nm
| 12
|
Common rail diesel injection system
|
Number
| Designation
|
| Engine 470.9
| Engine 471.9## ## as of 032691
|
BA07.16-N-1015-03A
| Nut, electrical line to cylinder injection nozzle
| Nm
| 1,5
| 1,5
|
Common rail diesel injection system
|
Number
| Designation
|
| Engine 473.9
|
BA07.16-N-1015-03A
| Nut, electrical line to cylinder injection nozzle
| Nm
| 1,5
|
Number
| Designation
| Order number
|
BR00.45-Z-1035-06A
| Grease, 1 kg
| A 001 989 08 51
|
1
| Disconnect engine management (MCM) electrical connection (X602.14) of the rear wiring harness (3).
|
2
| Pull out clamp (4) on the engine management (MCM) electrical connection (X602.14) upwards.
|
3
| Remove nuts (1) at the fuel injectors for cylinder 4 to 6 (Y611 to Y613) .
|
4
| Unscrew nuts (2) on engine brake solenoid valve, stage 2 (Y625) .
|
5
| Remove screw/bolts (5) on rear wiring harness (3) .
|
6
| Pull engine management (MCM) electrical connection (X602.14) out of the camshaft case (6) inwards.
|
7
| Remove rear wiring harness (3) from the camshaft case (6).
|
8
| Sealing ring (7) on the electrical Check engine management (MCM) CN (X602.14) for damage; replace if necessary.
|
|
| Installation: Coat sealing ring (7) with lubricant.
|
9
| Install in the reverse order.
|
