ws2600p0140b

000 588 04 19 00 Articulation angle inclinometer

Vrsta ws · tema 26.00 · verzija 0104 · 2018-12-19

Vrijedi za: Transmission all (4xWD, CAR, Heavy transporter, Light transporter, TRUCK)

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 2 Donji postroj › 26 Mehanički menjač › 26.00 Opšte — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 17 Drivetrain/axle › 17.20 Transmission › 17.20.1 Basic information — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 17 Drivetrain/axle › 17.22 Transfer case › 17.22.1 Basic information — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

EinPAS 17 Drivetrain/axle › 17.40 Propeller shaft › 17.40.1 Basic information — Serija 900 (modeli 9**) · Serija 902 (modeli 9**) · Serija 904 (modeli 918, 919, 924, 925, 938, 943, 957) · Serija 906 (modeli 917, 918, 924, 953)

Vrijedi i za motore/mjenjače: 139 ***, 254 ***, 256 ***, 272 ***, 276 ***, 282 ***, 457 9**, 541 9**, 542 9**, 608 ***, 700 4**, 700 420, 700 421, 700 422, 700 423, 715 3**, 715 5**, 722 6**, 722 9**, 724 ***, 724 0**, 724 033, 724 044, 724 045, 724 1**, 724 103, 724 114, 724 115, 724 120, 725 ***, 725 0**, 725 035, 725 037, 725 038, 725 085, 725 1**, 739 390, 739 391, 739 395, 739 396, 739 397, 739 398, 739 399, 740 698, 743 3**, 743 4**, 743 498, 746 971, 924 9**, 924 910, 925 9**, 926 9**

WS26.00-P-0140B

000 588 04 19 00 Articulation angle inclinometer

05.12.2018

Transmission

all (4xWD, CAR, Heavy transporter, Light transporter, TRUCK)

000 588 04 19 00 Articulation angle inclinometer

Verwendung in FG 26/27/28/41/Satz B


Purpose:
Electronic inclinometer for measuring angles at defined contact points.
Test equipment category CAT_A.
Reference information:
This workshop equipment is not sold through the regular replacement part ordering process in GLC/LC, but instead directly through the manufacturer/supplier. Recommended workshop equipment and information about the manufacturers/supplier are available in the maintenance system document (see below).

000 588 04 19 00

Note:

Device 09935­10 is the basic unit used for determining the articulation angle.

The combined measuring equipment with article number 09905­30 also has a measuring mode for determining the vehicle level.

Manufacturer

ROMESS Rogg Apparate + electronic GmbH & Co. KG

Dickenhardtstrasse 67

78054 VS- Schwenningen

Germany

http://www.romess.de

Type / model: Electronic inclinometer

Article no.: 09935-10