Service Information: Reworking the straightening tool 12 and 13 from set
7221.300
Vrsta si · tema 60.10 · verzija 0100 · 2006-03-14
Vrijedi za: MODEL 216, 221
Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.
Smještaj
Funkcijska skupina 3 Nadgradnja › 60 Nadgradnja Opšte › 60.10 Šablon za rastezanje, opremanje setom za rastezanje — Serija 216 · Serija 221
EinPAS 35 Body/frame/detachable parts › 35.15 Measurements/straightening bench › 35.15.30 Straightening bench — Serija 216 · Serija 221
EinPAS 45 Data/information › 45.20 Information/measures › 45.20.20 Service information — Serija 216 · Serija 221
SI60.10-P-0003A
Service Information: Reworking the straightening tool 12 and 13 from set 7221.300
10.3.06
MODEL 216, 221
P60.10-2182-06
Picture 1
ArrowInterference points
P60.10-2183-11
Picture 2
A10 mm
Arrow:Area for reworking
Due to tolerance additions of the body and straightening tool, both components can be contacted at the point in question (see picture 1).
This interference point can be reworked mechanically if required. To do this the mating surfaces (4 pieces) in the interference area should be adapted outwards in the y-direction approx. 5 to 10 mm (see picture 2).
