gf4340w1003f

Brake pedal PMR deactivation switch, component description

Vrsta gf · tema 43.40 · verzija 0100 · 2011-09-19

Vrijedi za: MODEL 970, 974 with CODE (BA2) Permanent magnet retarder

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 2 Donji postroj › 43 Kočnice-Pneumatika i dodatne kočnice › 43.40 Retarder (električki) — Serija 970 · Serija 974

GF43.40-W-1003F

Brake pedal PMR deactivation switch, component description

12.9.11

MODEL 970, 974 with CODE (BA2) Permanent magnet retarder

Brake pedal PMR deactivation switch, component description

W43.40-1085-11

Location

S201 Brake pedal PMR deactivation switch

The brake pedal PMR deactivation switch (S201) is on the right in the instrument panel.

Task

The brake pedal PMR deactivation switch (S201) is used to switch on/off activation of the permanent magnet retarder by depressing the brake pedal or by actuating the engine control/permanent brake operating lever (S2) (e.g. deactivation when performing the service brake test or in maneuvering mode).

The all-wheel drive neutral/Allison neutral/parking brake/PMR brake pedal relay (relay holder A31) (K1-A25) is supplied with ground via the brake pedal PMR deactivation switch (S201). Pressing the brake pedal PMR deactivation switch (S201) interrupts ground of the switching voltage at the all-wheel drive neutral/Allison neutral/parking brake/PMR brake pedal relay (relay holder A31) (K1-A25) and, therefore, the electric circuit of

circuit 15.