bt0941w000201a

Intermediate piece from charge air housing to turbocharger altered

Vrsta bt · tema 09.41 · verzija 0101 · 2009-02-16

Vrijedi za: ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954 ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954 ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001 ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 1 Motor › 09 Usis vazduha, nadpunjenje › 09.41 Cev vazduha nadpunjenja/hlađenje vazduha nadpunjenja — Serija 000 (modeli 001) · Serija 942 (modeli 9**) · Serija 950 · Serija 952 · Serija 953 · Serija 954

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.33 Intake manifold/charge air pipe — Serija 000 (modeli 001) · Serija 942 (modeli 9**) · Serija 950 · Serija 952 · Serija 953 · Serija 954

Vrijedi i za motore/mjenjače: 541 9**, 542 9**, 941 9**

BT09.41-W-0002-01A

Intermediate piece from charge air housing to turbocharger altered

ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954

ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954

ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001

ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Intermediate piece from charge air housing to turbocharger altered

W09.40-1078-11

Material and form of the intermediate piece altered

The intermediate piece (1) (rubber wrapped) was altered to be an intermediate piece (2) made out of die-casting (GD-AlSi) or permanent mold casting (GK-AlSi). Two sealing rings (3) were also mounted in the altered intermediate piece (2).

Sealing of the oil pressure line from the turbocharger to the charge air housing has been improved by this alteration.

If wear occurs on intermediate piece (1) then it will be replaced by intermediate piece (2) with sealing rings (3).