ar9160w0660a
Remove/install airbag unit on steering wheel
Vrsta ar · tema 91.60 · verzija 0302 · 2018-05-07
Vrijedi za: Model 374, 375, 940, 942, 943, 944, 950, 952, 953, 954, 958 with code SA5 (Airbag, front driver's seat) Model 970, 972, 974, 975, 976 with code SA5 (Airbag, front driver's seat)
Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.
Smještaj
Funkcijska skupina 3 Nadgradnja › 91 Sedišta, ležajevi, sistem za zadržavanje › 91.60 Vazdušni jastuk — Serija 374 · Serija 375 · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 · Serija 952 · Serija 953 · Serija 954 · Serija 958 · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976
EinPAS 27 Passive safety/restraint systems › 27.16 Airbag › 27.16.20 Airbag — Serija 374 · Serija 375 · Serija 940 · Serija 942 · Serija 943 · Serija 944 · Serija 950 · Serija 952 · Serija 953 · Serija 954 · Serija 958 · Serija 970 · Serija 972 · Serija 974 · Serija 975 · Serija 976
AR91.60-W-0660A
| Remove/install airbag unit on steering wheel
| 25.04.2018
|
Model
| 374, 375, 940, 942, 943, 944, 950, 952, 953, 954, 958
|
|
| with code SA5 (Airbag, front driver's seat)
|
Model
| 970, 972, 974, 975, 976
|
|
| with code SA5 (Airbag, front driver's seat)
|
Shown on model 970 with body 972.890
|
Warning
| Risk of injury during testing and repair operations related to pyrotechnical components
| Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts.
| AS91.00-Z-0008-01A
|
|
| Notes on safety-relevant components
|
| AH00.00-Z-0019-01A
|
|
| Information, assessment and legal requirements when working with, handling and storing pyrotechnical components
|
| AH91.00-Z-0000-10A
|
| Remove/install
|
|
|
1
| Switch off ignition.
|
|
|
2
| Disconnect ground lead from battery.
|
| AR54.10-W-0003A
|
3
| Remove bolts (2) from underside of steering wheel.
| Screw/bolt, airbag to steering wheel
| *BA91.60-N-1001-01B
|
|
|
| Screwdriver bit
| *126589001000
|
4
| Remove airbag (1) with attached electric line from steering wheel.
|
|
|
5
| Disconnect electrical connector from airbag (1).
| Installation: The electrical connector must latch into place.
|
|
6
| Install in the reverse order
|
|
|
7
| Perform function test.
| The airbag indicator lamp should not come on when the wheels are fully turned in either direction.
|
|
8
| Dispose of removed airbag (1) properly.
| Only if new airbag (1) was installed.
|
|
Number
| Designation
|
| Model 374, 375, 958
| Model 950, 952, 953, 954, 956, 970, 972, 974, 975, 976
|
BA91.60-N-1001-01B
| Screw/bolt, airbag to steering wheel
| Nm
| 6
| 6
|
Number
| Designation
|
| Model 940, 942, 943, 944
|
BA91.60-N-1001-01B
| Screw/bolt, airbag to steering wheel
| Nm
| 6
|
Povezani dokumenti
