ar8330d6620a

Remove and install evaporator temperature switch

Vrsta ar · tema 83.30 · verzija 0102 · 2001-05-21

Vrijedi za: MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 3 Nadgradnja › 83 Klimatizacija › 83.30 Klima-uređaj — Serija 901 (modeli 0**, 3**, 4**) · Serija 902 (modeli 0**, 3**, 4**) · Serija 903 (modeli 0**, 3**, 4**) · Serija 904 (modeli 0**, 3**, 4**)

EinPAS 39 Heating/ventilation/cooling › 39.15 Climate control › 39.15.12 Sensor/switch/wiring harness — Serija 901 (modeli 0**, 3**, 4**) · Serija 902 (modeli 0**, 3**, 4**) · Serija 903 (modeli 0**, 3**, 4**) · Serija 904 (modeli 0**, 3**, 4**)

AR83.30-D-6620A

Remove and install evaporator temperature switch

7.1.96

MODELS 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4 with CODE (H06) Air conditioning

Remove and install evaporator temperature switch

D83.30-0002-02

1 Screw

2 Temperature switch

3 Temperature sensor

Removing, installing

1

Remove heater unit

AR83.25-D-1000A

2

Unscrew bolt (1)

3

Pull temperature sensor (3) out of the evaporator in the heater housing

Installation: Insert temperature sensor approx. 10 cm into the evaporator

4

Remove temperature switch (2) from heater housing

5

Install in the reverse order

Povezani dokumenti