Remove/install interior motion sensor transmitter/receiver

Vrsta ar · tema 80.50 · verzija 0106 · 2003-07-15

Vrijedi za: MODEL 203, 210.0 as of 1.6.98, 210.2 as of 1.6.99, 215, 220 with code (882b) Interior motion sensor (only with anti-theft alarm system)

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 3 Nadgradnja › 80 Centralno zaključavanje, komforno rukovanje, sistemi protiv odvoženja › 80.50 Protivprovalni uređaj (EDW), zaštita unutrašnjeg prostora/zaštita od odvlačenja — Serija 203 · Serija 210 (modeli 0**, 2**) · Serija 215 · Serija 220

EinPAS 29 Drive authorization/security system › 29.20 Anti-theft alarm system › 29.20.14 Transmitter/receiver — Serija 203 · Serija 210 (modeli 0**, 2**) · Serija 215 · Serija 220

AR80.50-P-9820F

Remove/install interior motion sensor transmitter/receiver

17.4.98

MODEL 203,
210.0 as of 1.6.98,
210.2 as of 1.6.99,
215, 220 with code (882b) Interior motion sensor (only with anti-theft alarm system)

Remove/install interior motion sensor transmitter/receiver

P80.50-2027-04

Shown on model 210.0

A26/14 Interior motion sensor transmitter/receiver

 	Remove/Install
1	Unclip interior motion sensor transmitter/receiver (A26/14) from headliner (arrows)	On model 203.7 with code (413) panorama sliding roof, only the side arrests are present
			*110589035900
		 Installation: If it is not possible to clip in the interior motion sensor transmitter/receiver (A26/14), because the headliner sags, insert spacers, e.g. foam rubber elements between headliner and roof (except model 203.7).
2	Remove electrical connector from interior motion sensor transmitter/receiver (A26/14)
3	Install in the reverse order

110 589 03 59 00

Assembly wedge