P68.30-3116-04
1 Front door sill molding
2 Supports
P68.30-3115-04
3 Rear door sill molding
4 Supports
5 Edge guard
| Remove/Install | ||
1 | Completely open front and rear door | ||
2 | Unclip front door sill molding (1) and rear door sill molding (3) upward from retaining clips (arrows) by hand and remove. | Installation: Replace damaged retaining clips. | |
Installation: Ensure that guide lugs are seated correctly on front door sill molding (1) or rear door sill molding (3) in mounts (2, 4). | |||
Installation: Ensure that the rear section of the rear door sill molding (3) runs below the edge guard (5) | |||
3 | Install in the reverse order |