ar6810d1550a

Remove/install cover on instrument cluster

Vrsta ar · tema 68.10 · verzija 0206 · 2003-09-15

Vrijedi za: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 3 Nadgradnja › 68 Unutrašnja oprema › 68.10 Tabla sa instrumentima — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

EinPAS 37 Interior equipment › 37.15 Instrument panel › 37.15.44 Instrument panel/cover/trim/carrier — Serija 690 (modeli 6**) · Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**) · Serija 905 (modeli 6**)

AR68.10-D-1550A

Remove/install cover on instrument cluster

5.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6

Remove/install cover on instrument cluster

D68.20-1101-11

1 Cover

2 Bolt

3 Connector

Remove/Install

1

Unscrew screws (2)

2

Pull out cover (1)

*140589023300

To avoid damage to the cover when removing move removal hook (01) through second louver from bottom and position on reinforcement (magnified section).

Installation: Press in cover uniformly.

3

Disconnect plug (3)

A different number of switches may be fitted depending on vehicle equipment.

4

Install in the reverse order

Remove/install cover on instrument cluster

Pulling hooks

140 589 02 33 00