ar6210d5750a

Removing and installing front end paneling

Vrsta ar · tema 62.10 · verzija 0102 · 2004-10-21

Vrijedi za: MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 3 Nadgradnja › 62 Prednji deo i čeoni zid › 62.10 Prednji kraj — Serija 901 (modeli 0**, 3**, 4**) · Serija 902 (modeli 0**, 3**, 4**) · Serija 903 (modeli 0**, 3**, 4**) · Serija 904 (modeli 0**, 3**, 4**)

EinPAS 35 Body/frame/detachable parts › 35.30 Front end › 35.30.30 Front end, complete — Serija 901 (modeli 0**, 3**, 4**) · Serija 902 (modeli 0**, 3**, 4**) · Serija 903 (modeli 0**, 3**, 4**) · Serija 904 (modeli 0**, 3**, 4**)

AR62.10-D-5750A

Removing and installing front end paneling

6.11.95

MODEL 901.0 /3 /4, 902.0 /3 /4, 903.0 /3 /4, 904.0 /3 /4

Removing and installing front end paneling

D62.10-0001-09

Removal, installation

1

Remove front bumper

AR88.20-D-2000B

2

Remove turn signal lamps and front end center element (a) with head lamps

AR88.30-D-2302A

3

Unscrew bolts (7) on A-pillar

4

Remove sealant (18) between wheelhouse and fender

5

Unscrew bolts (19, 20, 21 and 22)

6

Drill out spreading pins (24) and pull off bumper mount (23)

7

Pull connector off of auxiliary turn signal lamp

8

Remove fender

Remove sealant residues.

9

Reinstall in opposite order

Before installing spray fender on inside with underbody protection agent.
Seal inside of fender at wheel well and wheel well transition.

Povezani dokumenti