ar4640p0201a

Removing, installing inner track rod with axial joint

Vrsta ar · tema 46.40 · verzija 0101 · 2010-01-19

Vrijedi za: MODEL 210

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 2 Donji postroj › 46 Upravljanje › 46.40 Poluge za upravljanje — Serija 210

EinPAS 22 Steering › 22.15 Power steering › 22.15.43 Steering arm/drag link/tie rod/damper — Serija 210

AR46.40-P-0201A

Removing, installing inner track rod with axial joint

18.1.10

MODEL 210

Removing, installing inner track rod with axial joint

P46.40-2019-01

 	Removing, installing
1	Remove drag link		AR46.40-P-0200C
2	Remove bellows		AR46.40-P-0400A
3	Steady gear rack using an open-end wrench (arrow)
4	Use 36mm open-end wrench attachment (012) to detach inner tie rod with axial joint (12)	 Do not use force (hammer blows, heavy leverage)
		 Open-end wrench	*220589010100
			*BA46.40-P-1003-01A
5	Install in reverse order

 Tie rod

Number	Designation			Model 210


BA46.40-P-1003-01A	Inner tie rod with axial joint on gear rack joint		Nm	110

Removing, installing inner track rod with axial joint

Open-end wrench

220 589 01 01 00

Povezani dokumenti