Remove/install power steering pump carrier from cylinder crankcase

Vrsta ar · tema 46.30 · verzija 0104 · 2009-11-24

Vrijedi za: STEERING 763.100 in MODEL 901, 902, 903, 904 with ENGINE 111.979

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 2 Donji postroj › 46 Upravljanje › 46.30 Servo pumpa za upravljanje — Serija 901 · Serija 902 · Serija 903 · Serija 904

EinPAS 22 Steering › 22.15 Power steering › 22.15.31 Power steering pump/oil reservoir/filter — Serija 901 · Serija 902 · Serija 903 · Serija 904

Vrijedi i za motore/mjenjače: 111 979, 763 100

AR46.30-D-4302-01C

Remove/install power steering pump carrier from cylinder crankcase

 Power steering pump

Number	Designation		Model 901.0/3/4, 902.0/3/4, 903.0/3/4 904.0/3/4


BA46.30-N-1002-01A	Power steering pump A/C compressor carrier to crankcase	Nm	21

D46.30-1007-01

D46.30-1006-01

1 Unscrew Allen screws (3 and 4) and remove power steering pump carrier (2) with sealing profile (1).

 Installation: Clean sealing surfaces on power steering pump carrier (2).
Replace sealing profile (1).
Align power steering pump carrier (2) in relation to timing case cover so that distance is A = 5 mm.
Pay attention to tightening torque.

2 Install in reverse sequence.