Remove/install pressure sensor

Vrsta ar · tema 43.30 · verzija 0200 · 2016-02-12

Vrijedi za: Vehicle 634.### #D with Cumbustion engine 457.907, 457.908, 457.916, 457.927, 457.932

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 2 Donji postroj › 43 Kočnice-Pneumatika i dodatne kočnice › 43.30 Retarder (hidraulični) — Serija 634

EinPAS 21 Brakes/vacuum system/compressed-air system › 21.21 Retarder › 21.21.12 Sensor/switch/wiring harness — Serija 634

Vrijedi i za motore/mjenjače: 457 907, 457 908, 457 916, 457 927, 457 932

AR43.30-B-0018A

Remove/install pressure sensor

12.02.16

Vehicle 634.### #D with Cumbustion engine 457.907, 457.908, 457.916, 457.927, 457.932

T43.30-0029-01

1 Pressure sensor

2 Oil reservoir plug

	Remove and install
1	Disconnect the pressure sensor electric cable (1)
2	Remove the pressure sensor (1) from the oil reservoir plug (2)		*BA43.30-B-1020-01D
3	Install in reverse order

Retarder (hydraulic)

Número	Denominação			Chassis 634.0 with 714.12/14/18 gearbox


BA43.30-B-1020-01D	Pressure sensor on oil reservoir top cover	M16	Nm	30