ar4020p020001ac
Determining specified caster value with nomogram
Vrsta ar · tema 40.20 · verzija 0113 · 2019-01-09
Vrijedi za: Model 460, 461 Wheelbase 2400 mm Model 463 up to model year 2019 Wheelbase 2400 mm
Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.
Smještaj
Funkcijska skupina 2 Donji postroj › 40 Točkovi, reglaža trapa › 40.20 Raglaža trapa — Serija 460 · Serija 461 · Serija 463
EinPAS 20 Chassis › 20.10 Wheel alignment › 20.10.20 Diagnosis/testing/measurement/adjusting — Serija 460 · Serija 461 · Serija 463
AR40.20-P-0200-01AC
| Determining specified caster value with nomogram
|
|
|
Model
| 460, 461
|
|
| Wheelbase 2400 mm
|
Model
| 463
|
|
| up to model year 2019
|
|
| Wheelbase 2400 mm
|
1
| Enter auxiliary dimension for rear axle (a) vertically into nomogram and at this point draw a line parallel to the existing lines.
|
2
| Enter supplementary dimension for front axle (b) horizontally in the nomogram and at this point draw a vertical line.
|
3
| Draw a horizontal line from the intersection point of the two lines and read off the specified caster value (c).
|
Nomogram for determining caster specified value (c) depending on the spring travel for a wheelbase of 2400 mm
|
a
| Supplementary dimension for rear axle
|
b
| Supplementary dimension for front axle
|
c
| Specified caster value
|
