Check caster and assign to tabular value

AR40.20-D-0322-03A

Check caster and assign to tabular value

Model

906.11/131/133/135/21/23/61/63/71/73 with rear axle 741.415/423

except code A50 (Front axle with increased load capacity)

except code C15 (Vehicle lowering)

except code XL8 (Higher weight 3.880 kg)

except code ZG1 (Engageable all-wheel drive)

except code ZG3 (Engageable all-wheel drive with gear reduction)

except code ZU7 (National version for Canada)

except code ZU8 (National version for USA)

Test and adjustment values for caster

Number

Designation

Model 906.11/131/133/135/21/23/61/63/71/73 with rear axle 741.415/423 except code A50/C15/ZG1/ZG3/ZU7/ZU8

BE40.20-N-1001-20M

Caster values, form

See

OF40.20-D-3000-00D

Test and adjustment values for caster

Number

Designation

Model 906.11/131/133/135/21/23/61/63/71/73 with rear axle 741.415/423 except code A50/C15/ZG1/ZG3/ZU7/ZU8

BE40.20-N-1002-20M

Permissible difference in caster between right and left side of vehicle

°

30'

Test and adjustment values for caster

Number

Designation

Model 906.11/131/133/135/21/23/61/63/71/73 with rear axle 741.415/423 except code A50/C15/ZG1/ZG3/ZU7/ZU8

BE40.20-N-1003-20M

Absolute caster tolerance

°

30'

1

Measure level of front axle and rear axle on one side of the vehicle and find the specified value for the caster in the table.

2

Determine actual caster values.

3

Compare specified value for caster against actual caster value and determine whether the permissible tolerance is met.

 The caster cannot be adjusted but it must be checked to ensure the chassis geometry is correct.