ar3540b0700a

Mechanically locking differential lock

Vrsta ar · tema 35.40 · verzija 0100 · 2016-02-12

Vrijedi za: Rear axle 740.6, 740.8, 741.7, 741.9, 745.525, 746.890Rear axle 746.2 with Vehicle 958

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 2 Donji postroj › 35 Zadnja osovina › 35.40 Blokade diferencijala — Serija 958

EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Serija 958

Vrijedi i za motore/mjenjače: 740 6**, 740 8**, 741 7**, 741 9**, 745 525, 746 2**, 746 890

AR35.40-B-0700A

Mechanically locking differential lock

12.02.16

Rear axle 740.6, 740.8, 741.7, 741.9, 745.525, 746.890

Rear axle 746.2 with Vehicle 958

Mechanically locking differential lock
Mechanically locking differential lock

B35.40-0002-01

B35.40-0004-01

1 Sealing ring

2 Electrical switch

3 Connector

4 Locking bolt

Lock

1

Disconnect the engine (3) and remove the electrical switch (2) and the sealing ring (1)

Install: Use a new sealing ring.

2

Install the bolt (4) in the blocking command cylinder and screw the bolt until it engages the block

Check the blocking application by turning the wheel hub. When the blocking engages, the wheel hub is locked.

Provide a bolt (4) having as reference the switch thread (2).

3

Unlock the differential blocking in the inverse order