ar3530d467002r
Install radial sealing ring on drive pinion
Vrsta ar · tema 35.30 · verzija 0300 · 2017-08-02
Vrijedi za: Rear axle 741 in model 909
Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.
Smještaj
Funkcijska skupina 2 Donji postroj › 35 Zadnja osovina › 35.30 Pogon, pogonska vratila — Serija 909
EinPAS 17 Drivetrain/axle › 17.51 Rear axle › 17.51.65 Rear axle differential/axle through-drive — Serija 909
Vrijedi i za motore/mjenjače: 741 ***
AR35.30-D-4670-02R
| Install radial sealing ring on drive pinion
|
|
|
Rear axle
| 741 in model 909
|
Number
| Designation
| Order number
|
BR00.45-Z-1008-06A
| Grease, silicone-based, 100 g
| A 001 989 28 51
|
BR00.45-Z-1017-01A
| Sealant, SV flame starting system, replaced with: A 001 989 25 20
| A 000 989 54 20
|
1
| Pack grease into the area on the radial shaft sealing ring between the dust lip and the sealing lip.
|
2
| Coat any radial-shaft sealing ring not lined with rubber along the outer circumference with sealant.
|
|
| Do not coat any radial shaft sealing ring partly lined with rubber with sealant.
Otherwise leakage may occur.
|
3
| Drive new radial shaft sealing ring using drift (01) up to end stop in the rear axle housing.
|
