Detaching wishbone from steering knuckle and front axle beam

Vrsta ar · tema 33.20 · verzija 0105 · 2001-08-09

Vrijedi za: FRONT AXLE 730.408 /410 in MODEL 901, 902 FRONT AXLE 730.409 in MODEL 902 FRONT AXLE 730.409 /413 in MODEL 903 FRONT AXLE 730.411 /414 in MODEL 904 FRONT AXLE 732.2 in MODEL 690.6

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 2 Donji postroj › 33 Prednja osovina › 33.20 Vodica točka, glavčina — Serija 690 (modeli 6**) · Serija 901 · Serija 902 · Serija 903 · Serija 904

EinPAS 17 Drivetrain/axle › 17.50 Front axle › 17.50.41 Transverse control arm/control arm/stabilizer bar — Serija 690 (modeli 6**) · Serija 901 · Serija 902 · Serija 903 · Serija 904

Vrijedi i za motore/mjenjače: 730 408, 730 409, 730 410, 730 411, 730 413, 730 414, 732 2**

AR33.20-D-1452-02A

Detaching wishbone from steering knuckle and front axle beam

730 589 02 33 00

Puller

D33.20-0021-01

1 Unscrew nut (13) on wishbone joint.

2 Press steering knuckle (10) off wishbone using  puller.

D33.20-0020-01

3 Unscrew stop plate (7) from wishbone (12).

 On versions with anti-roll bar, pull the stop plate hanging on the anti-roll bar upwards and leave hanging.

D33.20-0004-01

D33.20-0002-01

4 Undo rear screw joint on wishbone by unscrewing wishbone bolt (2).

5 Undo front screw joint on wishbone by unscrewing wishbone bolt (2).

6 Remove wishbone (12).