ar0920d131006b

Removing and installing vacuum lines on intake manifold

Vrsta ar · tema 09.20 · verzija 0100 · 2000-02-24

Vrijedi za: ENGINE 111.984 in MODEL 901.6, 902.6, 903.6, 904.6

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 1 Motor › 09 Usis vazduha, nadpunjenje › 09.20 Usisna grana, predgrejanje — Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.32 Line/hose/valve — Serija 901 (modeli 6**) · Serija 902 (modeli 6**) · Serija 903 (modeli 6**) · Serija 904 (modeli 6**)

Vrijedi i za motore/mjenjače: 111 984

AR09.20-D-1310-06B

Removing and installing vacuum lines on intake manifold

Intake manifold, intake manifold preheater

Number

Designation

Engine 111.979/
984

BA09.20-N-1004-02A

Vacuum line to vacuum connection of intake manifold

Nm

30

Removing and installing vacuum lines on intake manifold

D09.20-0016-01

1 Detach vacuum line (2) from intake manifold and place lines to the side.

2 Detach vacuum line (3) of brake booster from intake manifold.

The vacuum line (1) of the diaphragm pressure regulator can remain connected.

Pay attention to tightening torque of vacuum line (3).

Removing and installing vacuum lines on intake manifold

D09.20-0017-01

3 Take off fixture (arrow) of the vacuum line (4) coming from the air intake hose, at the intake manifold, and place line to the side together with the vacuum line of the brake booster.

4 Fit on in the reverse order.