ar0910d8030c

Removing and installing air intake hose

Vrsta ar · tema 09.10 · verzija 0101 · 2000-02-24

Vrijedi za: ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

Nije dostupno na jeziku „hr”; prikazano na jeziku Engleski.

Smještaj

Funkcijska skupina 1 Motor › 09 Usis vazduha, nadpunjenje › 09.10 Filter za vazduh — Serija 901 (modeli 0**) · Serija 902 (modeli 0**) · Serija 903 (modeli 0**) · Serija 904 (modeli 0**)

EinPAS 15 Engine › 15.30 Air intake/charging › 15.30.32 Line/hose/valve — Serija 901 (modeli 0**) · Serija 902 (modeli 0**) · Serija 903 (modeli 0**) · Serija 904 (modeli 0**)

Vrijedi i za motore/mjenjače: 111 979

AR09.10-D-8030C

Removing and installing air intake hose

13.2.96

ENGINE 111.979 in MODEL 901.0, 902.0, 903.0, 904.0

Removing and installing air intake hose

D09.10-1000-05

1 Air cleaner housing

2 Intake air temperature sensor

3 Crankcase ventilation line

4 Air intake hose

5 Idle speed control actuator

Removing, installing

1

Detach crankcase ventilation line (3) at air intake hose (4)

2

Take off intake air temperature sensor (2) at air intake hose (3)

3

Detach air intake hose (4) at air cleaner housing (1), at idle speed control actuator (5) and take out of engine compartment

Inspect condition of hose clamps, replace if necessary

4

Install in the reverse order