G54.10-A001-78
1 | Charging cable | 3.1 | Cap | 4 | Sequence | ||
2 | Vehicle socket | 3.2 | Cap | 5 | Locks |
Danger | Risk of death when working on component parts and systems with U >= 30 V alternating voltage (AC) or U >= 60 V direct voltage (DC) | Do not touch damaged or defective live component parts and lines or non-insulated electrical connections and lines. | |
Topical note | General information on handling vehicles with high-voltage on-board electrical system and/or lithium-ion battery and/or gaseous-fuel drive system | ||
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Topical note | Notes on battery | ||
| Check | ||
1 | Check entire length of charging cable (1), plugs and switches for cracks, kinks, bites, cuts, crushed areas, chafe marks and other damage. | If problems occur, | |
| |||
replace charging cable (1). | |||
After obtaining special order. | |||
2 | Open socket flap at radiator grille. | ||
3 | Check vehicle socket (2) for damage. | If problems occur, | |
| |||
Replace vehicle socket (2). | |||
After obtaining special order. | |||
4 | Check caps (3.1, 3.2) for damage and correct locking. | If problems occur, | |
| |||
Replace vehicle socket (2). | |||
After obtaining special order. | |||
5 | Check locks (5) for damage and correct operation. | If problems occur, | |
| |||
Replace vehicle socket (2). | |||
After obtaining special order. | |||
6 | Check drain (4) for clear passage and soiling. | | |
If problems occur, | |||
| |||
rectify the problems. | |||
After obtaining special order. | |||
7 | Close socket flap at radiator grille. |