1 | Main menu button |
2 | Accept call button |
3 | OK button |
4 | Scroll forward/back button |
5 | "Back" button |
6 | Multifunction display |
G82.90-0001-75
1 | Close doors. |
2 | Turn ignition key to position "1". |
3 | Press Main menu button (1) repeatedly until the menu item "Trip" is highlighted in multifunction display (6), and then press OK button (3). |
The standard display (trip odometer/total distance) must appear on the multifunction display (6) as shown in the picture; if necessary press the scroll forward button (4) repeatedly. |
4 | First press and hold down "Accept call" button (2) and then, within 1 second, also press and hold down OK button (3) for approx. 5 seconds. |
The multifunction display (6) shows the workshop menu with the "Vehicle data", "Dynamometer test", "Change brake lining" and "ASSYST PLUS" tabs. |
5 | Press scroll forward and backward button (4) repeatedly until "ASSYST PLUS" is highlighted and confirm selection with OK button (3). |
6 | Switch on ignition. |
The tabs "Service data", "Full service", "Veh. handover" and "Oil measurement" appear on the multifunction display (6). |
7 | Select "Veh. handover" tab and confirm with OK button (3). |
"Vehicle handed over?" is displayed on the multifunction display (6). |
8 | Press scroll forward and backward button (4) repeatedly until "Yes" is highlighted and confirm selection with OK button (3). |
9 | Press "Back" button (5) repeatedly until "Workshop" is displayed on the multifunction display (6). |
10 | Switch off ignition. |