Test values for rear axle center assembly gear assembly
Rear axle
B35.30-0022-01
Remove
1 Release the lock bolt (3) and remove the bolt (2) with the sliding pad (4) from the differential-holder housing (1).
B35.30-0023-01
Install
2 Install the bolt (2) with the sliding pad (4) and the lock nut (3) in the differential-holder housing (1).
If necessary, install a new sliding pad (4).
B35.30-0138-01
Adjust
3 Tighten the adjustment bolt (2) until the sliding pad thrust the ring gear surface and the return the bolt 3/4 of turn. This procedure will provide the specific play between the sliding pad (4) and the ring gear
4 Hold the bolt (2) with a wrench in order to not change its adjustment position and tighten the nut (3) to lock the bolt.