AR35.15-B-0100XA | Remove/install wishbone control arm | 12.02.16 |
Rear axle 742.825, 746.888 with Vehicle 368
Rear axle 746.984 with Vehicle 384.065
B35.15-0001-06
Vehicles with HH 4 axle
1 Triangular arm
2 Arm easel
3 Support
| Remove and install | ||
Danger! | Risk of accidents due to vehicle unintentional move when the engine is started. Risk of injury by pinching and burn by contact during the starting procedure or with the engine running | Assure vehicle against unintentional move. Use tight fitting and closed work clothes. Do not touch heated or running parts. | |
1 | Loosen the bolts fastening the triangular arm (1) of the arm easel (2). | | |
2 | Loosen the bolts fastening the triangular arm of the support (3) and remove it. | Installing: If necessary, replace the arm's expansive bushing. | |
3 | Install in reverse order |
Control arm
Número | Denominação | Chassis 368.1, 384.065 | |||
BA35.15-B-1001-03A | Solid state triangular stretching bar on the rack, over the rear axle | M18x1.5 | Nm | 350...390 | |
M22x1,5 | Nm | 520...600 | |||
BA35.15-B-1002-03A | Solid triangular stretching bar on the chassis cross member bearing | M18x1.5 | Nm | 350...390 | |
M22x1,5 | Nm | 520...600 | |||
Documents référencés
- as0000b000501a Risque d'accident si le véhicule démarre tout seul alors que le moteur tourne. Risque de blessure par contusions et brûlures au cours des interventions durant le démarrage et lorsque le moteur tourne