AR07.15-B-9235TA | Remove/install MR/PLD injection lines | 12.02.16 |
Cumbustion engine 904.9 with Vehicle 958
Cumbustion engine 906.9 with Vehicle 958
W07.15-0085-12
Represented in engine 904.9
1 Engine coating
2 Injection tubes
| Remove | ||
Danger! | Risk of injury due to being caught and smashed when tilting the cabin | During the cabin tilting operation back and forth, do not go in its inclination area and take preventive measures to avoid that non-authorized people get into it. Always tilt the cabin up to its final position and lock it with the safety device. | |
1.1 | Tilt the cabin | ||
| Indications about the cabin tilting | ||
2 | Remove the left side encapsulation | ||
3 | Remove the engine coating (1) | ||
Danger! | Risk of explosion by inflammation, risk of poisoning by inhalation and fuel ingestion, as well as risk of injury by contact of fuel to the skin and eyes. | It is forbidden to smoke, set fire, sparks or open flame. Only store fuel in appropriate and respectively identified containers. When handling fuel use appropriate protective clothing and equipment | |
4 | Remove the tubes from the injectors (2) | | |
| |||
| Install | ||
Danger! | Risk of explosion by inflammation, risk of poisoning by inhalation and fuel ingestion, as well as risk of injury by contact of fuel to the skin and eyes | It is forbidden to smoke, set fire, sparks or open flame. Only store fuel in appropriate and respectively identified containers. When handling fuel use appropriate protective clothing and equipment | |
5 | Install new injector tubes (2) | Whenever the injector tubes (2) are removed, they must compulsorily be replaced. Do not bend the injection tubes (2), observe their installation position | |
| |||
| |||
| |||
Danger! | Risk of accident due to the involuntary movement when the engine is operating. Risk of injury due to being smashed and burns due to contact during the start-up process or with the operating engine | Make sure that the vehicle will not accidentally move. Wear work clothes well closed and tight. Do not touch the heated or moving parts. | |
6 | Actuate the engine start-up and bleed the fuel system | The fuel system performs the bleed automatically. Let the engine operating for approx. 1 min, if the engine stops or does not start to operate, repeat the start-up process after 2 min. | |
7 | Shutdown the engine | ||
8 | Check the tightness of the new tubes of the injectors (2). | In the case of leaks, replace the damaged new injector tubes (2). | |
9 | Install the engine coating (1) | ||
10 | Install the left side encapsulation | ||
Danger! | Risk of injury due to being caught and smashed when tilting the cabin | During the cabin tilting operation back and forth, do not go in its inclination area and take preventive measures to avoid that non-authorized people get into it. Always tilt the cabin up to its final position and lock it with the safety device. | |
11.1 | Return the cabin to its position | ||
| Indications about the cabin tilting |
Diesel injection system with unit pumps (MR/PLD)
Número | Denominação | Engine 904.9, 906.9, 924.9, 926.9 without code MS8 | |||
BA07.15-B-1004-01A | Injection pipe of the injection unit to the injector's pressure tube | Only for the tube A 906 070 14 33 | 1st stage | Nm | 10 |
2nd stage | angular | 80° | |||
Only for the tube A 906 070 24 33 | 1st stage | Nm | 15 | ||
2nd stage | angular | 90° | |||
000 589 07 03 00
Box wrench
000 589 68 03 00
Box wrench adapter
Documents référencés
- ah6080b000301a Remarques pour le basculement de la cabine
- as0000b000501a Risque d'accident si le véhicule démarre tout seul alors que le moteur tourne. Risque de blessure par contusions et brûlures au cours des interventions durant le démarrage et lorsque le moteur tourne
- as4700b000101a
- as6080b000101a Risque de blessure par coincement ou par écrasement lors du basculement de la cabine