055 589 00 61 00
Installation device
B01.40-0014-01
Do not tighten excessively the nut (1), this could deform the liner, besides not allowing the immediate removal of the device, due to the delay in returning to its primitive diameter.
1 Install the device in the liner (2) and tighten a little the nut (1).
B01.40-0010-01
The liner's rotation during the insertion in the block, avoids O-ring damage.
in case of reutilization of the liner, install it in the block at 90 degrees from the previous position.
2 Insert the liner (2) in the block (3) until it begins the contact with the O-rings in such a way that it is offset 180º in relation to its final position.
3 Complete the insertion turning it until its final position.
4 Remove the device from the liner (2).