sm3220d0010a

Retrofit stiffer rear axle spring and front axle reinforcement

Tyyppi sm · aihe 32.20 · versio 0101 · 2007-09-10

Koskee: MODEL 906.13# ## as of 304998 up to 305979 with CODE (XL8) Weight variant, 3.88t

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 2 Alusta › 32 Jousitus › 32.20 Teräsjousitus, vääntösauvajouset, tasonsäätö — Mallisarja 906 (mallit 13*)

EinPAS 20 Alusta › 20.16 Jousitus › 20.16.3 Jälkiasennus/muutostyö — Mallisarja 906 (mallit 13*)

EinPAS 45 Tiedot/Informaatio › 45.20 informaatio/toimenpiteet › 45.20.40 Huoltotoimenpiteet — Mallisarja 906 (mallit 13*)

SM32.20-D-0010A

Retrofit stiffer rear axle spring and front axle reinforcement

7.9.07

MODEL 906.13# ## as of 304998 up to 305979 with CODE (XL8) Weight variant, 3.88t

Operation no. of operation texts or standard texts

Category

Op. no.

Operation text

Acc. no.

Code

O

026360

Rear axle spring (stiffer) and front axle reinforcement VEH with code XL8

32 901 99

FAXL8CE6

O

026399

Measure vehicle (optically/ with adjustment operations)(retrofit as per front axle reinforcement)

32 901 99

FAXL8CE6

O

026400

Measure vehicle (electronically/ with adjustment operations) (retrofit as per front axle reinforcement)

32 901 99

FAXL8CE6

O

026429

Adjust camber at front-axle halves on both sides (retrofit as per front axle reinforcement)

32 901 99

FAXL8CE6

Remove/install

Danger!

Risk of death caused by vehicle slipping or toppling off of the lifting platform.

Align vehicle between columns of vehicle lift and position four support plates at vehicle lift support points specified by vehicle manufacturer.

AS00.00-Z-0010-01A

Danger!

Risk of injury caused by pinching or crushing when working on springs or spring bodies that are under tension

Use only approved tensioning devices; shield off hazard area if necessary.
Inspect special tools for damage and proper operation (visual inspection).
Wear protective gloves.

AS00.00-Z-0001-01A

1

Remove/install/replace rear spring

AR32.20-D-0230H

2

Remove/install/replace front shock-absorber strut

AR32.25-D-0100H

3

Remove/install/replace stabilizer bar on front axle

AR32.20-D-0300H

4

Perform a wheel alignment check

AR40.20-D-0200H

Parts ordering notes

Part no.

Designation

Quantity

A 906 320 61 30 05

Parts kit FAXL8CE6

1

Viitatut asiakirjat