Service Information: Replacement of controller unit and control unit for
automatic gear control (AGS)
Tyyppi si · aihe 26.21 · versio 0100 · 2014-11-05
Koskee: TRANSMISSION 712, 715 in MODEL 950.5/6, 952.5, 954.5 with CODE GE1 (Electronic drive control) TRANSMISSION 712, 715 in MODEL 970, 972, 974, 976 with CODE GE1 (Electronic drive control)
Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.
Koskee myös moottoreita/vaihteistoja: 712 ***, 715 ***
SI26.21-W-0002A
Service Information: Replacement of controller unit and control unit for automatic gear control (AGS)
05.09.2014
TRANSMISSION
712, 715 in MODEL 950.5/6, 952.5, 954.5
with CODE GE1 (Electronic drive control)
TRANSMISSION
712, 715 in MODEL 970, 972, 974, 976
with CODE GE1 (Electronic drive control)
In the event of customer complaints that indicate a defect such as, e.g. a short circuit or an electrical fault in the automatic gear control (AGS) control unit, then in the majority of instances, from a technical point of view, it is fully sufficient to replace the automatic gear control (AGS) control unit. Generally the automatic gear control (AGS) controller unit need not be replaced.
If the automatic gear control (AGS) control unit contains hydraulic fluid (Pentosin), then the automatic gear control (AGS) controller unit has to be replaced. This should then be separately noted in the warranty claim message field.