bt0941w000201a

Intermediate piece from charge air housing to turbocharger altered

Tyyppi bt · aihe 09.41 · versio 0101 · 2009-02-16

Koskee: ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954 ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954 ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001 ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 1 Moottori › 09 Imuilmanotto, ahtaminen › 09.41 Ahtoilmaputki/välijäähdytys — Mallisarja 000 (mallit 001) · Mallisarja 942 (mallit 9**) · Mallisarja 950 · Mallisarja 952 · Mallisarja 953 · Mallisarja 954

EinPAS 15 Moottori › 15.30 Imuilmanotto/ahtaminen › 15.30.33 Imusarja/ahtoilmaputki — Mallisarja 000 (mallit 001) · Mallisarja 942 (mallit 9**) · Mallisarja 950 · Mallisarja 952 · Mallisarja 953 · Mallisarja 954

Koskee myös moottoreita/vaihteistoja: 541 9**, 542 9**, 941 9**

BT09.41-W-0002-01A

Intermediate piece from charge air housing to turbocharger altered

ENGINE 541.9## ## as of 24778 in MODEL 950, 952, 953, 954

ENGINE 542.9## ## as of 26083 in MODEL 950, 952, 954

ENGINE 541.9##, 941.9## ## as of 24778 in MODEL 000.001

ENGINE 542.9##, 942.9## ## as of 26083 in MODEL 000.001

Intermediate piece from charge air housing to turbocharger altered

W09.40-1078-11

Material and form of the intermediate piece altered

The intermediate piece (1) (rubber wrapped) was altered to be an intermediate piece (2) made out of die-casting (GD-AlSi) or permanent mold casting (GK-AlSi). Two sealing rings (3) were also mounted in the altered intermediate piece (2).

Sealing of the oil pressure line from the turbocharger to the charge air housing has been improved by this alteration.

If wear occurs on intermediate piece (1) then it will be replaced by intermediate piece (2) with sealing rings (3).