Service brake |
Number | Designation | Type 934.241/251, 938.14, 958.0/1/2/4 | ||
BE42.10-B-1001-10E | Pressure regulator - closing pressure | bar | 10 (-0,2...0,6) | |
BE42.10-B-1002-10E | Permissible pressure loss, without braking system actuation (measuring period, 10 min) | bar | 0,1 | |
BE42.10-B-1003-10E | Operating pressure of the service brake circuits 1 and 2 | bar | 10 (-0,2...0,6) | |
BE42.10-B-1004-10E | Operating pressure of the parallel consumers - circuits 3 and 4 | bar | 8,5 (-0,5...0,2) | |
BE42.10-B-1005-10E | Wear limit of the disc brake pads | mm | 2 | |
BE42.10-B-1006-10E | Wear limit of the brake lining, drum brake with cam shaft | Normal | mm | 5 |
Rep. 1 | mm | 6 | ||
Rep. 2 | mm | 7 | ||
BE42.10-B-1007-10E | Wear limit of the brake lining, drum brake with expansive wedge | mm | - | |
BE42.10-B-1008-10E | Static safety pressure (closing pressure) 4-circuit protection valve, circuits 1 and 2 (without supply and 0 bar in the defective circuit. | bar | 6 | |
BE42.10-B-1009-10E | Static safety pressure (closing pressure) 4-circuit protection valve, circuits 3 and 4 (without supply and 0 bar in the defective circuit. | bar | 4,5 | |
BE42.10-B-1010-10E | Warning lamp, service brake pressure (circuit 1 or 2) | bar | 6,8 (0,2) | |
BE42.10-B-1011-10E | Warning light, pressure of the parking brake and trailer (circuit 3) | bar | 5,5 (0,2) | |
BE42.10-B-1012-10E | Warning light of the reserve pressure (cycle 4) | bar | - | |
BE42.10-B-1013-10E | Dynamic safety pressure (opening pressure), 4-circuit protection valve, circuits 1 and 2 | bar | 9 (-0,3) | |
BE42.10-B-1014-10E | Dynamic safety pressure (opening pressure), 4-circuit protection valve, circuits 3 and 4 | bar | 7,5 (-0,3) | |
BE42.10-B-1015-10E | Pressure regulator - Connection pressure | bar | 9,3 | |
BE42.10-B-1016-10E | Permissible pressure loss in the brake system actuation with 3.5 bar (3 minutes measuring period) | bar | 0,4 | |
BE42.10-B-1017-10E | Sensor of water condensate: "dry" | Volt | 1,1...2 | |
BE42.10-B-1018-10E | Sensor of water condensate: "humid" | Volt | 3,1...4 | |
BE42.10-B-1019-10E | Surplus sealing in the brake cylinder | mm | 3 |