az8264d000107a

Retrofitting CD changer in seat frame

Tyyppi az · aihe 82.64 · versio 0100 · 2006-10-31

Koskee: MODEL 901, 902, 903, 904, 905 with CODE (EF6) Radio Sound 20 with CODE (EF7) Radio Sound 30 with CODE (ET8) Sound 30 Auto-Pilot-System (APS)

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 82 Korin sähkölaitteet › 82.64 CD-makasiini — Mallisarja 901 · Mallisarja 902 · Mallisarja 903 · Mallisarja 904 · Mallisarja 905

EinPAS 31 Kommunikaatio/informaatio/viihdekeskus › 31.67 Mediatoisto/tallennusväline › 31.67.3 Jälkiasennus/muutostyö — Mallisarja 901 · Mallisarja 902 · Mallisarja 903 · Mallisarja 904 · Mallisarja 905

AZ82.64-D-0001-07A

Retrofitting CD changer in seat frame

Model 901, 902, 903, 904, 905 with CODE EF6, EF7, ET8 (Radio Sound 20, 30 or 30 APS)

Repair materials

Number

Designation

Order number

BR00.45-Z-1014-01A

Adhesive tape

A 000 989 98 85

Retrofitting CD changer in seat frame

D82.64-1104-01

1 Install retaining brackets (1) on CD changer (2) with two screws each.

Retrofitting CD changer in seat frame

D82.64-1105-01

2 Position CD changer on floor of seat frame and align with side access opening.

When aligning CD changer observe removal and installation of CD magazine. Ensure that there is sufficient space in the area of the side access opening.

3 Mark two mounting holes each for retaining brackets on the floor.

4 Drill cab floor with 3.5 mm bit at marked points.

5 Screw CD changer to vehicle floor with sheet metal screws.

Coat threads of sheet metal screws with sealant before screwing in to protect against water and corrosion.