ar9800p020201a

Notes on masking when painting in area of A-pillar or C-pillar

Tyyppi ar · aihe 98.00 · versio 0102 · 1998-03-13

Koskee: MODEL 126

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 98 Maalaus › 98.00 Yleistä — Mallisarja 126

EinPAS 40 Kotelosuojaus/maalaus › 40.15 Maalaus/maalipinnan hoito › 40.15.31 Maalaus metallipohjamaali — Mallisarja 126

AR98.00-P-0202-01A

Notes on masking when painting in area of A-pillar or C-pillar

Cover plate for protecting rubber seal under the drip molding

WF58.50-P-9800-01A

The rubber seal under the drip molding can be protected against traces of paint using a narrow cover plate made from light alloy (shop-made tool).

1 Loosen bottom screw of the drip molding in the area of the A-pillar or C-pillar and unscrew the two screws above it.

2 Pull off drip molding slightly and push the cover plate between body and rubber seal.

3 Slightly tighten bottom screw for mounting the cover plate.

After the drying process, remove the cover plate and secure the drip molding.

Viitatut asiakirjat