P91.60-0006-06
Warning | Risk of injury during testing and repair operations related to pyrotechnical components | Do not expose pyrotechnical component parts to temperatures above 100 °C or 212 °F. Disconnect current supply when working on such component parts. | |
Topical note | Information on preventing damage to electronic components due to electrostatic discharge | ||
Information, assessment and legal requirements when working with, handling and storing pyrotechnical components | |||
| Remove/install | ||
1 | Switch off ignition and remove transmitter key | ||
2 | Disconnect battery ground line | ||
4 | Remove two screws/bolts (arrow) at left and right, then secure driver airbag against falling down | Bolt, airbag to steering wheel | |
Screwdriver bit | |||
5 | Lift driver airbag off from steering wheel | ||
6 | Release and disconnect electrical connector from squib at gas generator | ||
7 | Remove driver airbag from steering wheel | ||
8 | Install in the reverse order | ||
| Check | ||
10 | Check and erase vehicle fault memory using the diagnostic system | When replacing the driver airbag. | |
|
126 589 00 10 00
Screwdriver bit
Viitatut asiakirjat
- ad0000p200004a
- ad0000p200004a
- ah5400p000101a Ohjeita elektronisten rakenneosien sähköstaattisen varauksen purkautumisen aiheuttamien vaurioiden välttämiseksi
- ah9100z000010a Ohjeita, analyysejä ja lakisääteisiä määräyksiä pyroteknisiin rakenneosiin kohdistuviin töihin, osien käsittelyyn ja varastointiin
- ar5410p0003a Akun maajohdon irrotus ja asennus
- as9100z000801a Loukkaantumisvaara: Varo pyroteknisiä rakenneosia tarkastus- ja korjaustöiden yhteydessä