ar8820w2000d

Removing and installing front bumper

Tyyppi ar · aihe 88.20 · versio 0103 · 2012-02-24

Koskee: MODEL 375.3 with BODY 375.810 MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 88 Korin liittyvät osat, ulkopuoliset luukut › 88.20 Puskurit — Mallisarja 375 (mallit 3**, 810) · Mallisarja 940 (mallit 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**)

EinPAS 35 Kori/runko/liittyvät osat › 35.38 Puskuri/spoileri/ulkoverhous/säilytyslaatikko/etusuoja › 35.38.30 Etupuskuri — Mallisarja 375 (mallit 3**, 810) · Mallisarja 940 (mallit 899) · Mallisarja 950 (mallit 5**, 6**) · Mallisarja 952 (mallit 5**, 6**) · Mallisarja 953 (mallit 6**) · Mallisarja 954 (mallit 5**)

AR88.20-W-2000D

Removing and installing front bumper

16.2.12

MODEL 375.3 with BODY 375.810

MODELS 950.5 /6, 952.5 /6, 953.6, 954.5 with BODY 940.899

Removing and installing front bumper

W88.20-1001-09

1 Bumper

2 Bayonet connector

3 Torx screw

7 Paneling

4 Hex. head screw

5 Torx screw

6 Torx screw

Removal, installation

Danger!

Risk of explosion caused by escaping oxyhydrogen gas. Risk of injury caused by caustic burns to eyes, skin and mucous membranes from battery electrolyte (contains diluted sulfuric acid) or metal spatter due to short circuit. Risk of burn injuries caused by short circuit. Risk of poisoning caused by swallowing battery electrolyte (contains diluted sulfuric acid) or absorption of lead over the skin or orifices

No fire, sparks, open flames or smoking.

Wear acid-resistant gloves and clothing and safety glasses with side guards.

Do not place any conductive objects on the battery and avoid any short circuit from battery positive to ground.

Only fill liquid battery electrolyte (diluted sulfuric acid) into suitable and appropriately marked containers.

AS54.10-Z-0001-01A

1

Disconnect ground lead from battery

Notes on battery

All models

AH54.10-P-0001-01A

2

Disconnect headlamp connectors (2)

3

Remove paneling (7)

4

Fold up caps on coupling jaw

5

Remove bumper (1)

6

Install in the reverse order

7

Check headlamps, adjust

AP82.10-W-8260A

Viitatut asiakirjat