AR83.70-W-5758A | Removing and installing glow plug | 2.2.98 |
MODEL 950, 952, 953, 954 with BODY 940.899 with CODE (H62) Warm air heater "Eberspächer D3 LP"
MODEL 950, 952, 953, 954 with BODY 942.899 with CODE (H62) Warm air heater "Eberspächer D3 LP"
MODEL 970, 972, 974, 975, 976 with BODY 972.899 with CODE (H62) Warm air auxiliary heater "Eberspächer" D3 LP
W83.70-0048-06
1 Hex. screw
2 Cover
3 Glow plug
4 Gasket
5 Glow plug screen
| Removal, installation | ||
1 | Disconnect ground lead from battery | Do not interrupt main battery supply while heater is in operation or during heater shut-off delay. | |
2 | Remove cover (2) | ||
3 | Unscrew connection cable from glow plug | ||
4 | Remove glow plug (3) | Installation: Replace gasket (4). | |
5 | Remove glow plug screen (5) | Installation: Observe position of lug (arrow A) on glow plug screen. The hole (arrow B) for glow plug ventilation must be free. | |
6 | Reinstall in opposite order | ||
Danger! | Fuel vapors present an explosion hazard. Combustion gases are toxic when inhaled. Heater can cause severe burns during and after operation. | Do not start up or operate stationary heaters, auxiliary heaters or engines with heater boosters in closed rooms or in the vicinity of service stations. Allow heater to cool off after operation and wear protective gloves. | |
7 | Check stationary heater for proper function |
Viitatut asiakirjat
- ar8370w530202c
- as8370z000201a Räjähdysvaara: polttonestehöyryt ovat herkästi syttyviä. Myrkytysvaara: pakokaasujen hengittäminen on terveydelle vaarallista. Loukkaantumisvaara: lisälämmityslaitteen osat voivat olla kuumia vielä pitkään laitteen pois