ar8325p1406gz

Remove/install water repellent over wiper system

Tyyppi ar · aihe 83.25 · versio 0101 · 2006-01-12

Koskee: MODEL 164

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

Sijainti

Toimintoryhmä 3 Kori, päällysrakenne › 83 Lämmitys, tuuletus ja ilmastointi › 83.25 Lämmitysautomatiikka — Mallisarja 164

EinPAS 35 Kori/runko/liittyvät osat › 35.38 Puskuri/spoileri/ulkoverhous/säilytyslaatikko/etusuoja › 35.38.44 Verhous/somiste-elementti/etusuoja — Mallisarja 164

AR83.25-P-1406GZ

Remove/install water repellent over wiper system

15.12.05

MODEL 164

Remove/install water repellent over wiper system

P83.25-2244-07

1 Rubber seal

2 Rubber seal

3 Water repellent

4 Clip

5 Cover

Remove/install

Danger!

Risk of injury in the form of trapping or crushing, or even severing of limbs, if caught in windshield wiper mechanism

Always remove ignition key when working on windshield wiper mechanism.

AS82.30-Z-0001-01A

1

Remove wiper arms

AR82.30-P-6100GZ

2

Detach rubber seal (1) from cover (5)

3

Detach rubber seal (2) from left and right fender

4

Unclip washer fluid hose from clip (4)

5

Remove cover (5)

Detach cover (5) on one side in the opposite direction.

Installation: Lubricate upper edge of cover (5) and windshield at bottom with soapy water.

6

Install in the reverse order

Viitatut asiakirjat