Remove and install pulsed valve

Tyyppi ar · aihe 83.25 · versio 0105 · 2003-09-15

Koskee: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic" MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic" MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR83.25-D-1155A

15.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (H25) Automatic heater control "Heatmatic"

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

MODEL WD1, WD2, WD3, WD6, WD7, XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7

MODEL 690.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

D83.25-1105-06

1 Cycle valve

2 Hose clamp

3 Coolant hose

4 Rubber mounts

5 Bolt

6 Bracket

7 Rubber mounts

 	Remove/install
1	Position suitable receptacle for coolant below vehicle
2	Loosen hose clamps (2) and disconnect hoses (3)
3	Unscrew screws (5) and remove bracket (6) together with pulsed valve (1)
4	Turn bracket (6) slightly to the right and remove from the rubber mounts (4)
5	Pull rubber mounts (4, 7) out	 Installation: install new rubber mount.
6	Install in the reverse order