Disassemble and assemble heater housing

Tyyppi ar · aihe 83.25 · versio 0104 · 2003-09-15

Koskee: MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic" MODEL WD1, WD2, WD3, WD6, WD7 MODEL XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (HH9) Automatic air conditioning "Tempmatic"

Ei saatavilla kielellä ”fi”; näytetään kielellä Englanti.

AR83.25-D-1001B

14.7.99

MODEL 901.6, 902.6, 903.6, 904.6, 905.6 with CODE (HH9) Automatic air conditioning "Tempmatic"

MODEL WD1, WD2, WD3, WD6, WD7

MODEL XD1, XD2, XD3, XD4, XD5, XD6, XD7, YD1, YD2, YD3, YD4, YD5, YD6, YD7 with CODE (HH9) Automatic air conditioning "Tempmatic"

D83.20-1103-06

1 Bolt

2 Heater housing cover

3 Evaporator

4 O-Ring

5 Gasket

6 Gasket

7 Heater housing

8 Wiring harness

9 Bolt

10 Heat exchanger

11 Connector

12 Gasket

13 O-Ring

 	Disassembling, assembling
1	Remove gaskets (5, 6 and 12)	 Installation: Clean sealing surfaces and install new gaskets.
2	Remove heater housing cover (2)
3	Remove heat exchanger (10) from the heater housing (7)
4	Remove wiring harness (8)
5	Unscrew connecting piece (11)	 Installation: install new O-rings (13).
6	Remove evaporator (3)	 Installation: install new O-rings (4).
7	Assemble in reverse order