Remove/install loudspeakers in front doors

AR82.62-P-7845RT

Remove/install loudspeakers in front doors

20.6.06



Radio must be switched off



Removing

1

Remove door lining from left or right front door

 Do not yet disconnect the power window electrical connector from the door control unit.

AR72.10-P-1000RT

2

Fully close window(s)

3

Disconnect power window electrical connector from the door control unit and place door lining to the side

 Treat ribbon cable carefully to prevent damage.

4

Disconnect electrical connector (2) from the left front door speaker (H4/5) or from right front door speaker (H4/6)

5

Drill out rivets (1) with a dia. 4.8 mm drill bit

Cordless drill/driver

*WH58.30-Z-1007-20A

6

Pry left front door speaker (H4/5) or right front door speaker (H4/6) off of door module using a long wedge and remove

 Carefully pry off, otherwise the sealing strip on the flange of the left front door speaker (H4/5) or the right front door speaker (H4/6) will be damaged.

 Long wedge

*115589035900

7

Remove remaining rivet material that has fallen into the door skin when drilling out the rivets (1)

 Remaining rivet material must be completely removed, otherwise this can cause corrosion damage.

Wet/dry vacuum cleaner

*WE58.40-Z-1005-03A



Install

8

Insert left front door speaker (H4/5) or right front door speaker (H4/6) into the door module

9

Secure left front door speaker (H4/5) or right front door speaker (H4/6) to the door module using rivets

 Use aluminum/steel hollow rivets, dia. 4.8 x 15 mm

 Hand riveter

*WH58.30-Z-1003-29A

10

Connect electrical connector (2)

11

Install door lining in the left or right front door

AR72.10-P-1000RT

Number

Designation

WH58.30-Z-1007-20A

Cordless drill/driver

WH58.30-Z-1003-29A

Hand riveter

WE58.40-Z-1005-03A

Wet/dry vacuum cleaner