AR82.60-P-7502FF | Remove/install radio | 16.8.06 |
MODEL 454.0
with CODE (C25) smart radio six
with CODE (C26) smart radio multimedia navigator
with CODE (C29) smart radio navigator
P82.60-5226-07
Shown on vehicle with CODE (C25) smart radio six
1 Bolts
2 Antenna plug
3 Retaining clamp
4 Security catch
5 Combination plug
A40/3 smart radio multimedia navigator (with code (C26) smart radio multimedia navigator)
A2/4 smart radio six (with code (C25) smart radio six)
A2/56 smart radio navigator (with code (C29) smart radio navigator)
| Remove/install | ||
1 | Loosen upper control panel control unit and lay down to side with electrical line connected. | ||
2 | Remove bolts (1) | ||
3 | Pull smart radio six (A2/4), smart radio navigator (A2/56) or smart radio multimedia navigator (A40/3) out of radio recess until combination plug (5) and antenna plug (2) are accessible | ||
4 | Detach antenna connector (2) | ||
5.1 | Disconnect GPS antenna connector | In vehicles with code (C26) smart radio multimedia navigator or code (C29) smart radio navigator. | |
The GPS antenna connector is next to the antenna plug (2). | |||
6 | Release lock tab (4), fold up retaining clip (3) and disconnect the combination plug (5) | Do not damage lock tab (4), since the locking mechanism of the combination plug (5) may otherwise be affected. | |
7 | Remove smart radio six (A2/4), smart radio navigator (A2/56) or smart radio multimedia navigator (A40/3) | ||
8 | Fit cap to fiber optic cable in combination plug (5) | ||
9 | Install in the reverse order | ||
10 | Read fault memory, erase if necessary | Enable smart radio six (A2/4), smart radio navigator (A2/56) or smart radio multimedia navigator (A40/3) if necessary. | |
| Connect STAR DIAGNOSIS and read out fault memory | ||
STAR DIAGNOSIS diagnosis system |
Commercially available tools