Remove/install windshield washer system washer fluid hose

AR82.35-P-6980RT

Remove/install windshield washer system washer fluid hose

24.3.05

 

Remove/install

1

Open engine hood (1) and move to upright position

AR88.40-P-1000RT

2

Remove air intake duct below engine hood (2)

AR83.25-P-1407RT

3

Remove washer fluid hose (4) from windshield washer nozzles (5).

 Risk of breakage.

4

Unclip washer fluid hose (4) from clips (3) of air inlet grate.

5

Pull washer fluid hose (4) downward through spring strut tower (6) (arrow)

 Note correct installation position.

6

Remove front section of fender liner in front fender

 Front section of fender liner in right front fender

AR88.10-P-1310RT

 Wheel does not need to be removed.

7

Disconnect washer fluid hose (4) from windshield washer fluid pump (M5/1) and remove

 Collect escaping washer fluid with a suitable reservoir.

 Set of stop plugs

*129589009100

8

Install in the reverse order

9

Fill washer fluid reservoir



Windshield washer system - inspect fluid level, adjust to correct level

AP82.35-P-8210RT

10

Carry out function check of the windshield wipers and the windshield washer system



Windshield wipers, windshield washer system and headlamp cleaning system - function check

AP82.30-P-8252RT

11

Check setting of windshield washer nozzles (5), adjust if necessary.



Check setting of windshield washer system spray nozzles

AP82.35-P-8252-01RT