AR82.10-W-4905E | Removing and installing taillamp | 5.9.96 |
MODEL NAB374.502 /523 /551 /554 /557 /584 /651,
375, 970, 972, 974, 975, 976, 375.4, 944, 950, 952, 953, 954
W82.10-0003-11
Left taillamp illustrated
1 Connector
2 Hexagon nut
3 RetainingLocking ring
4 Washer
5 License plate panel
6 Illumination carrier
E3/E4 Left/right taillamp
Modification notes
9.12.97 | Switching off ignition added | Step 1 | |
Disconnect ground lead from battery added | Step 2 | ||
Check electrical system for proper function added | Steps 7 to 9 | ||
19.11.01 | Disconnect ground lead from battery erased | Step 2 |
| Remove/install | ||
1 | Switch off ignition | ||
2 | Switch off light and turn signal system | ||
3 | Disconnect connector (1) from left/right taillamp (E3/E4) | ||
4 | Unscrew hex. nuts (2) with retaining ring (3) and washer (4) | ||
5 | Disconnect left/right taillamp (E3/E4) | Remove left taillamp together with license plate panel (5) | |
6 | Install in the reverse order | ||
| Inspecting | ||
7 | Perform function test on the electrical system |